Structural Adhesives Limited dev site

Substrates: Steel

  • Structural Two Part Epoxy Potting Compound Long Cure Cycle S-211E

    Product Overview

    S-211E Epoxy Potting Compound is a two-part, low viscosity product.  S-211E has been specially formulated to cure with low exotherm, even when mixed in bulk quantities.  The low viscosity and good wetting properties of S-211E Epoxy Potting Compound permit rapid penetration into small gaps and facilitate surface coating. After mixing, it has a pot life of approximately 4 hours.

     

    Key Features

    • low viscosity
    • good wetting
    • low exotherm

    Applications

    S-211 E epoxy potting compound is specially designed to encapsulate electronic components and circuitry e.g. coils, transformers and electronic assemblies.

    Technical Specifications

    • mix ratio:2:1 by weight
    • Working Time:4 hours at 22C
    • Cure Time: 8 hours at 22C
    • Colour: clear
    • Shelf Life 12  months at room temperature

    Packaging Options

    • 1.5kg set
    • Other sizes on request

    Compatible Substrates

    TDS and MSDS Downloads

    You can download technical data sheets and materials safety data here.

     

    Product Reviews – what our customers think of this product

    0
    0 out of 5 stars (based on 0 reviews)
    Excellent
    Very good
    Average
    Poor
    Terrible

    The Reviews

    There are no reviews yet. Be the first one to write one.

    Submit a review

    log in to leave a review

  • Structural 40 min Epoxy Adhesive S-2605E

    Product Overview

    S-2605E is a two-part epoxy adhesive curing at room temperature. It has a 40-minute work life, so conferring a longer handling and repositioning time than the rapid epoxy adhesive S-2030E. S-2605E is a clear and mobile liquid adhesive.

     

    Key Features

    • cures at room temperature
    • long repositioning time
    • mobile liquid

    Applications

    S – 2605E is offered as a simple, general purpose adhesive with a long work life.

    Technical Specifications

    • mix ratio: 1:1 by weight or volume
    • Working Time: 40 minutes at 22C
    • Cure Time: 8 hours at 22C
    • Colour: off white
    • Shelf Life 12  months at room temperature

    Packaging Options

    • 400ml cartridge
    • Other sizes on request

    TDS and MSDS Downloads

    You can download technical data sheets and materials safety data here.

     

    Product Reviews – what our customers think of this product

    0
    0 out of 5 stars (based on 0 reviews)
    Excellent
    Very good
    Average
    Poor
    Terrible

    The Reviews

    There are no reviews yet. Be the first one to write one.

    Submit a review

    log in to leave a review

  • Structural 60 min Epoxy Adhesive S-2150E

    Product Overview

    S-2150E is a two part adhesive curing at room temperature. S-2150E is a  general purpose adhesive with good gap-fill combined with easy workability. S-2150E has a medium cure speed.

     

    Key Features

    • medium cure speed
    • thixotropic
    • bonds to many metals and plastics

    Applications

    S-2150E finds applications in the metal and plastics assembly industries.

    Technical Specifications

    • mix ratio: 1:1 by weight or volume
    • Working Time: 60 minutes at 22C
    • Cure Time: 8 hours at 22C
    • Colour: off white can be coloured to suit
    • Shelf Life 12  months at room temperature

    Packaging Options

    • 400ml twin cartridge
    • Other sizes on request

    TDS and MSDS Downloads

    You can download technical data sheets and materials safety data here.

     

    Product Reviews – what our customers think of this product

    0
    0 out of 5 stars (based on 0 reviews)
    Excellent
    Very good
    Average
    Poor
    Terrible

    The Reviews

    There are no reviews yet. Be the first one to write one.

    Submit a review

    log in to leave a review

  • Structural Chemical Resistant Sealant/Adhesive S-2775E

    Product Overview

    S-2775E is a two-part, cold curing adhesive. S-2775E has good resistance to chemicals and bonds a wide variety of plastics.

     

    Key Features

    • Good resistance to chemicals
    • bonds a wide variety of plastics and metals
    • can be used as a sealant and adhesive

    Applications

    S – 2775E may be used in general plastic and metal assembly, particularly where resistance to a hostile environment is required.

    Technical Specifications

    • mix ratio: 1:1 by weight or volume
    • Working Time: 45 minutes at 22C
    • Cure Time: 4 hours at 22C
    • Colour: off white
    • Shelf Life 12  months at room temperature

    Packaging Options

    • Part 1: 10 kg in steel pail.
    • Part 2: 10 kg in steel pail.
    • Others by arrangement.

    TDS and MSDS Downloads

    You can download technical data sheets and materials safety data here.

     

    Product Reviews – what our customers think of this product

    0
    0 out of 5 stars (based on 0 reviews)
    Excellent
    Very good
    Average
    Poor
    Terrible

    The Reviews

    There are no reviews yet. Be the first one to write one.

    Submit a review

    log in to leave a review

  • Structural A2 Minor Fire Rated Epoxy Adhesive S-2825FRE

    Product Overview

    S – 2825FRE is a two-part, cold curing A2 minor/non-substantial component adhesive of limited combustibility designed to bond brick slips to a variety of substrates.

     

    Key Features

    • Limited combustibility
    • Classified as A2-s1d0 according to BS EN 13501-1
    • Passed independent hear/train/freeze/thaw and bond strength tests
    • Yellow pigment ensures proper mixing visibility

    Applications

    S – 2825FRE is designed for use bonding brick slips to a variety of substrates such as cement fibre-board applications which require an adhesive of limited combustibility such as external use on buildings above 18 m.

    Technical Specifications

    • Mix Ratio: 1:1 by weight
    • Working time: 1hour at 22C
    • Cure time: 24hours at 22C (full cure 28days)
    • colour: yellow
    • shelf life: 6 months at room temperature

    Packaging Options

    • 1 kg Dosed Set
    • 10kg Dosed Set

    Compatible Substrates

    TDS and MSDS Downloads

    You can download technical data sheets and materials safety data here.

     

    Product Reviews – what our customers think of this product

    0
    0 out of 5 stars (based on 0 reviews)
    Excellent
    Very good
    Average
    Poor
    Terrible

    The Reviews

    There are no reviews yet. Be the first one to write one.

    Submit a review

    log in to leave a review

  • Structural Epoxy Tile Adhesive For Bonding Ceramic Tiles S-2765E

    Product Overview

    S-2765E is a two-part, cold curing adhesive designed to bond special bricks. It can be used to bond damp facing bricks. The adhesive is offered in its natural (grey) colour and in pigmented master colours – red, buff and blue – for the user to tint as required.

    Key Features

    • Bonds damp substrates
    • can be coloured to suit (normally grey)
    • slow cure

    Applications

    S-2765E is designed for use bonding ceramic tiles to concrete but will also bond other materials, e.g. building blocks, steel and concrete.

    Technical Specifications

    • mix ratio: 1:1 by weight or volume
    • Working Time: 120 minutes at 22C
    • Cure Time: 8 hours at 22C
    • Colour: grey can be coloured to suit
    • Shelf Life 12  months at room temperature

    Packaging Options

    • Part 1 & Part 2: 5 kg each in a plastic bucket
    • Other sizes on request

    TDS and MSDS Downloads

    You can download technical data sheets and materials safety data here.

     

    Product Reviews – what our customers think of this product

    0
    0 out of 5 stars (based on 0 reviews)
    Excellent
    Very good
    Average
    Poor
    Terrible

    The Reviews

    There are no reviews yet. Be the first one to write one.

    Submit a review

    log in to leave a review

  • Structural Toughened Acrylic Adhesive Low Odour S-605A

    Product Overview

    Reactive acrylic adhesive are adhesives which, using graft copolymer technology, combine the high shear strengths and temperature resistant qualities of acrylic adhesive with the high peel strength and impact resistance of a reactive rubber base. S-605A is a low odour, mobile, rapid curing general purpose adhesive. S-01A the general purpose activator for use when bonding most materials.

    Key Features

    • low odour formulation
    • high flash point (NON FLAMMABLE)
    • rubber toughened
    • high reactivity

    Applications

    The adhesives are suitable for the structural bonding of steel, aluminium, painted or primed metal and some rigid plastics in the construction of vehicle bodies and similar assemblies.

    Technical Specifications

    • mix ratio: 2 way with S-01A
    • Working Time: 10 minutes at 22C
    • Cure Time: 1 hours at 22C
    • Colour: beige
    • Shelf Life 6  months at room temperature

    Packaging Options

    • 310ml cartridge
    • Other sizes on request

    TDS and MSDS Downloads

    You can download technical data sheets and materials safety data here.

     

    Product Reviews – what our customers think of this product

    0
    0 out of 5 stars (based on 0 reviews)
    Excellent
    Very good
    Average
    Poor
    Terrible

    The Reviews

    There are no reviews yet. Be the first one to write one.

    Submit a review

    log in to leave a review

  • Structural Heat Cured Epoxy Adhesive- Aluminium Filled, High Impact Resistance S-171E

    Product Overview

    S-171E is a single part, heat cured, epoxy adhesive. S-171E contains an in-built rubber-toughening component to enhance peel strength and impact resistance and an aluminium filler to improve heat transmission and impact properties. It displays high shear strength in many hostile environments.

    Key Features

    • rubber toughened
    • aluminium filled
    • enhanced impact and peel resistance
    • good chemical resistance
    • high shear strength

    Applications

    S-171E bonds most metals and plastics that are not affected by the curing temperature and so finds applications in the engineering industry.

    Technical Specifications

    • mix ratio: single part
    • Cure cycle: 30 minutes at 160C
    • Colour: grey
    • Shelf Life 6  months at room temperature

    Packaging Options

    • 290ml cartridge
    • 22.5 L (25 kg) drum
    • Others by arrangement

    TDS and MSDS Downloads

    You can download technical data sheets and materials safety data here.

     

    Product Reviews – what our customers think of this product

    0
    0 out of 5 stars (based on 0 reviews)
    Excellent
    Very good
    Average
    Poor
    Terrible

    The Reviews

    There are no reviews yet. Be the first one to write one.

    Submit a review

    log in to leave a review

  • Structural Very Fast Cure Epoxy Adhesive S-2030E

    Product Overview

    S-2030E is a two part, cold curing epoxy. It reacts in a few minutes to give a tough, resilient bond on a wide variety of surfaces.

    Key Features

    • very fast cure
    • clear
    • can be coloured to suit
    • tough resilient bond

    Applications

    S-2030E is suitable for many household and DIY tasks where a rapid cure is necessary. This mix is a clear, fairly viscous liquid.

    Technical Specifications

    • mix ratio: 1:1 by weight or volume
    • Working Time: 3 minutes at 22C
    • Cure Time: 7 minutes at 22C
    • Colour: clear
    • Shelf Life 12  months at room temperature

    Packaging Options

    • 50ml cartridge
    • 10kg set
    • Other sizes on request

    TDS and MSDS Downloads

    You can download technical data sheets and materials safety data here.

     

    Product Reviews – what our customers think of this product

    0
    0 out of 5 stars (based on 0 reviews)
    Excellent
    Very good
    Average
    Poor
    Terrible

    The Reviews

    There are no reviews yet. Be the first one to write one.

    Submit a review

    log in to leave a review

  • Structural Epoxy Brick Adhesive For Damp Bricks S-2300E

    Structural Epoxy Brick Adhesive For Damp Bricks S-2300E

    Product Overview

    S-2300E is a two-part, cold curing adhesive designed to bond special bricks. It can be used to bond damp facing bricks. The adhesive is offered in its natural (grey) colour and in pigmented master colours – red, buff and blue – for the user to tint as required.

     

    Key Features

    • Bonds damp brick
    • 50 year life expectancy
    • can be coloured to suit
    • excess removed easily does not mark brick

    Applications

    S-2300E is primarily designed to make “cut and bond” special bricks. S-2300E will also bond other materials, e.g. building blocks, steel and concrete.

    Technical Specifications

    • mix ratio: 1:1 by weight or volume
    • Working Time: 60 minutes at 22C
    • Cure Time: 8 hours at 22C
    • Colour: off white can be coloured to suit
    • Shelf Life 12  months at room temperature

    Packaging Options

    • Part 1 & Part 2: 5 kg each in a plastic bucket
    • Other sizes on request

    TDS and MSDS Downloads

    You can download technical data sheets and materials safety data here.

     

    Product Reviews – what our customers think of this product

    0
    0 out of 5 stars (based on 0 reviews)
    Excellent
    Very good
    Average
    Poor
    Terrible

    The Reviews

    There are no reviews yet. Be the first one to write one.

    Submit a review

    log in to leave a review