Structural Adhesives Limited dev site

Substrates: Plastics

  • Structural Two Part Epoxy Potting Compound Long Cure Cycle S-211E

    Product Overview

    S-211E Epoxy Potting Compound is a two-part, low viscosity product.  S-211E has been specially formulated to cure with low exotherm, even when mixed in bulk quantities.  The low viscosity and good wetting properties of S-211E Epoxy Potting Compound permit rapid penetration into small gaps and facilitate surface coating. After mixing, it has a pot life of approximately 4 hours.

     

    Key Features

    • low viscosity
    • good wetting
    • low exotherm

    Applications

    S-211 E epoxy potting compound is specially designed to encapsulate electronic components and circuitry e.g. coils, transformers and electronic assemblies.

    Technical Specifications

    • mix ratio:2:1 by weight
    • Working Time:4 hours at 22C
    • Cure Time: 8 hours at 22C
    • Colour: clear
    • Shelf Life 12  months at room temperature

    Packaging Options

    • 1.5kg set
    • Other sizes on request

    Compatible Substrates

    TDS and MSDS Downloads

    You can download technical data sheets and materials safety data here.

     

    Product Reviews – what our customers think of this product

    0
    0 out of 5 stars (based on 0 reviews)
    Excellent
    Very good
    Average
    Poor
    Terrible

    The Reviews

    There are no reviews yet. Be the first one to write one.

    Submit a review

    log in to leave a review

  • Structural 40 min Epoxy Adhesive S-2605E

    Product Overview

    S-2605E is a two-part epoxy adhesive curing at room temperature. It has a 40-minute work life, so conferring a longer handling and repositioning time than the rapid epoxy adhesive S-2030E. S-2605E is a clear and mobile liquid adhesive.

     

    Key Features

    • cures at room temperature
    • long repositioning time
    • mobile liquid

    Applications

    S – 2605E is offered as a simple, general purpose adhesive with a long work life.

    Technical Specifications

    • mix ratio: 1:1 by weight or volume
    • Working Time: 40 minutes at 22C
    • Cure Time: 8 hours at 22C
    • Colour: off white
    • Shelf Life 12  months at room temperature

    Packaging Options

    • 400ml cartridge
    • Other sizes on request

    TDS and MSDS Downloads

    You can download technical data sheets and materials safety data here.

     

    Product Reviews – what our customers think of this product

    0
    0 out of 5 stars (based on 0 reviews)
    Excellent
    Very good
    Average
    Poor
    Terrible

    The Reviews

    There are no reviews yet. Be the first one to write one.

    Submit a review

    log in to leave a review

  • Structural 60 min Epoxy Adhesive S-2150E

    Product Overview

    S-2150E is a two part adhesive curing at room temperature. S-2150E is a  general purpose adhesive with good gap-fill combined with easy workability. S-2150E has a medium cure speed.

     

    Key Features

    • medium cure speed
    • thixotropic
    • bonds to many metals and plastics

    Applications

    S-2150E finds applications in the metal and plastics assembly industries.

    Technical Specifications

    • mix ratio: 1:1 by weight or volume
    • Working Time: 60 minutes at 22C
    • Cure Time: 8 hours at 22C
    • Colour: off white can be coloured to suit
    • Shelf Life 12  months at room temperature

    Packaging Options

    • 400ml twin cartridge
    • Other sizes on request

    TDS and MSDS Downloads

    You can download technical data sheets and materials safety data here.

     

    Product Reviews – what our customers think of this product

    0
    0 out of 5 stars (based on 0 reviews)
    Excellent
    Very good
    Average
    Poor
    Terrible

    The Reviews

    There are no reviews yet. Be the first one to write one.

    Submit a review

    log in to leave a review

  • Structural Chemical Resistant Sealant/Adhesive S-2775E

    Product Overview

    S-2775E is a two-part, cold curing adhesive. S-2775E has good resistance to chemicals and bonds a wide variety of plastics.

     

    Key Features

    • Good resistance to chemicals
    • bonds a wide variety of plastics and metals
    • can be used as a sealant and adhesive

    Applications

    S – 2775E may be used in general plastic and metal assembly, particularly where resistance to a hostile environment is required.

    Technical Specifications

    • mix ratio: 1:1 by weight or volume
    • Working Time: 45 minutes at 22C
    • Cure Time: 4 hours at 22C
    • Colour: off white
    • Shelf Life 12  months at room temperature

    Packaging Options

    • Part 1: 10 kg in steel pail.
    • Part 2: 10 kg in steel pail.
    • Others by arrangement.

    TDS and MSDS Downloads

    You can download technical data sheets and materials safety data here.

     

    Product Reviews – what our customers think of this product

    0
    0 out of 5 stars (based on 0 reviews)
    Excellent
    Very good
    Average
    Poor
    Terrible

    The Reviews

    There are no reviews yet. Be the first one to write one.

    Submit a review

    log in to leave a review

  • Structural Toughened Acrylic Adhesive Low Odour S-605A

    Product Overview

    Reactive acrylic adhesive are adhesives which, using graft copolymer technology, combine the high shear strengths and temperature resistant qualities of acrylic adhesive with the high peel strength and impact resistance of a reactive rubber base. S-605A is a low odour, mobile, rapid curing general purpose adhesive. S-01A the general purpose activator for use when bonding most materials.

    Key Features

    • low odour formulation
    • high flash point (NON FLAMMABLE)
    • rubber toughened
    • high reactivity

    Applications

    The adhesives are suitable for the structural bonding of steel, aluminium, painted or primed metal and some rigid plastics in the construction of vehicle bodies and similar assemblies.

    Technical Specifications

    • mix ratio: 2 way with S-01A
    • Working Time: 10 minutes at 22C
    • Cure Time: 1 hours at 22C
    • Colour: beige
    • Shelf Life 6  months at room temperature

    Packaging Options

    • 310ml cartridge
    • Other sizes on request

    TDS and MSDS Downloads

    You can download technical data sheets and materials safety data here.

     

    Product Reviews – what our customers think of this product

    0
    0 out of 5 stars (based on 0 reviews)
    Excellent
    Very good
    Average
    Poor
    Terrible

    The Reviews

    There are no reviews yet. Be the first one to write one.

    Submit a review

    log in to leave a review

  • Structural Very High Grab Hybrid Polymer Brick Slip Adhesive S-732U VHG

    Structural Very High Grab Hybrid Polymer Brick Slip Adhesive S-732U VHG

    Product Overview

    S-732U VHG is a high quality, neutral, elastic one component construction joint sealant and universal adhesive based on a hybrid polymer. The Very High grab version is formulated for brick slip bonding in situations where extremely good grab is required i.e. in the soffit of an arch.

     

    Key Features

    • Bonds damp brick
    • very good grab
    • elastic when cured
    • good peel strength

    Applications

    S-732U VHG is very easy to apply and has excellent adhesion on many surfaces. S-732U VHG stays permanently elastic after curing and does not smell. S-732U VHG can be painted ‘wet on wet’. S-732U VHG also has excellent weather resistance and resistance to many chemicals. It does not stain porous surfaces such as natural stone, blue stone, marble and granite. S-732U VHG is used in the construction and building, fabrication, civil engineering, automotive, coach and caravan and locomotive industries and finds particular applications in:-

    •  Sealing and bonding in the building and metal industry
    • Structural bonding in vibrating constructions
    • Sealing of floor joints
    • Supple bonding for shipbuilding and car bodies
    • Joints between precious natural stones such as numerable
    • Bonding of wall panels

    Technical Specifications

    • mix ratio: single part
    • Working Time: 20 minutes at 22C
    • Cure Time: 8 hours at 22C
    • Colour: white
    • Shelf Life 12  months at room temperature

    Packaging Options

    • 290ml cartridge
    • Other sizes on request

    TDS and MSDS Downloads

    You can download technical data sheets and materials safety data here.

     

    Product Reviews – what our customers think of this product

    0
    0 out of 5 stars (based on 0 reviews)
    Excellent
    Very good
    Average
    Poor
    Terrible

    The Reviews

    There are no reviews yet. Be the first one to write one.

    Submit a review

    log in to leave a review

  • Structural Cleaning System S-4093M

    Product Overview

    S-4093M is a non-chlorinated solvent blend with high solvency power, developed for the removal of uncured resin components from substrates. It is used with polyester resin, polyurethane or epoxy systems. S-4093M has low toxicity, low colour, low VOC and is biodegradable. All these characteristics make it a favourable, environmentally friendly and “safe” solvent system for use in cleaning applications.

     

    Key Features

    • non-chlorinated
    • high solvency power
    • low toxicity
    • cleans a wide variety of adhesives e.g. polyurethanes, epoxies etc.

    Applications

    Removal of uncured and partially cured resin from application tools, brushes and for the flushing of lines

    Technical Specifications

    • colour: slightly yellow clear liquid
    • odour: low ethereal
    • flash point: >80C
    • evaporation rate slow
    • Shelf Life 12  months at room temperature

    Packaging Options

    • 5L jerrycan

    Compatible Substrates

    TDS and MSDS Downloads

    You can download technical data sheets and materials safety data here.

     

    Product Reviews – what our customers think of this product

    0
    0 out of 5 stars (based on 0 reviews)
    Excellent
    Very good
    Average
    Poor
    Terrible

    The Reviews

    There are no reviews yet. Be the first one to write one.

    Submit a review

    log in to leave a review

  • Structural Single Part Epoxy Void Filler S-1008E

    Product Overview

    S-1008E is a single part, heat cured, epoxy void filler. It displays high durability in many hostile environments.

     

    Key Features

    • single part
    • heat cure
    • self levelling
    • void filler

    Applications

    S-1008E can be used to fill voids in metal and plastic will flow into voids and self-level.

    Technical Specifications

    • mix ratio: single part
    • Cure Time: 2 hours at 130C
    • Colour: off white / beige
    • Shelf Life 12  months at room temperature

    Packaging Options

    • 290ml cartridge
    • Other sizes on request

    Compatible Substrates

    TDS and MSDS Downloads

    You can download technical data sheets and materials safety data here.

     

    Product Reviews – what our customers think of this product

    0
    0 out of 5 stars (based on 0 reviews)
    Excellent
    Very good
    Average
    Poor
    Terrible

    The Reviews

    There are no reviews yet. Be the first one to write one.

    Submit a review

    log in to leave a review

  • Structural Very Fast Cure Epoxy Adhesive S-2030E

    Product Overview

    S-2030E is a two part, cold curing epoxy. It reacts in a few minutes to give a tough, resilient bond on a wide variety of surfaces.

    Key Features

    • very fast cure
    • clear
    • can be coloured to suit
    • tough resilient bond

    Applications

    S-2030E is suitable for many household and DIY tasks where a rapid cure is necessary. This mix is a clear, fairly viscous liquid.

    Technical Specifications

    • mix ratio: 1:1 by weight or volume
    • Working Time: 3 minutes at 22C
    • Cure Time: 7 minutes at 22C
    • Colour: clear
    • Shelf Life 12  months at room temperature

    Packaging Options

    • 50ml cartridge
    • 10kg set
    • Other sizes on request

    TDS and MSDS Downloads

    You can download technical data sheets and materials safety data here.

     

    Product Reviews – what our customers think of this product

    0
    0 out of 5 stars (based on 0 reviews)
    Excellent
    Very good
    Average
    Poor
    Terrible

    The Reviews

    There are no reviews yet. Be the first one to write one.

    Submit a review

    log in to leave a review

  • Structural Low Viscosity Flooring Compound And Injectable Void Filler S-2508E

    Product Overview

    S-2508E is a two part epoxy with low viscosity and good flow characteristics. Designed to bond under floor matting to give sound deadening where de-lamination has occurred.

     

    Key Features

    • low viscosity
    • good flow characteristics
    • long pot life
    • injectable

    Applications

    S-2508E will bond a variety of substrates including concrete, plastics and wood. Can be used to inject into walls to fill voids.

    Technical Specifications

    • mix ratio: 2:1 by weight or volume
    • Working Time: 60 minutes at 22C
    • Cure Time: 8 hours at 22C
    • Colour: clear
    • Shelf Life 12  months at room temperature

    Packaging Options

    • 7.5kg set in plastic jerrycans
    • Other sizes on request

    Compatible Substrates

    TDS and MSDS Downloads

    You can download technical data sheets and materials safety data here.

     

    Product Reviews – what our customers think of this product

    0
    0 out of 5 stars (based on 0 reviews)
    Excellent
    Very good
    Average
    Poor
    Terrible

    The Reviews

    There are no reviews yet. Be the first one to write one.

    Submit a review

    log in to leave a review